-
Calcined Kaolin
-
Ultra Calcined Kaolin
- Ultra white and ultra-fine calcined kaolin for coating industry
- Ultra white and ultra-fine calcined kaolin for paper industry
- Ultra white and ultra-fine calcined kaolin for wire and cable
- Ultra white and ultra-fine calcined kaolin for rubber industry
- Ultra white and ultra-fine calcined kaolin for crop protection
- Ultra white and ultra-fine calcined kaolin for plastic masterbatch
- Ultra white and ultra-fine calcined kaolin for agricultural film insulation agent
- Special Calcined Kaolin
- Modified Calcined Kaolin
- Common Calcined Kaolin
-
Ultra Calcined Kaolin
- New Materials
- Metakaolin
- Superfine Nano Kaolin
- Hydrated kaolin products for Rubber
- Titanium Dioxide Slurry for Textile Coating
- Acrylic resin for coatings
- Calcined kaolin for Cement Industry
- Calcined kaolin products for ceramics
- Calcined kaolin products for Rubber
- Calcined kaolin products for engineering plastics
- Calcined kaolin products for wire and cable
- Calcined kaolin products for papermaking
- Calcined kaolin products for coatings
- Crop protectants
0102030405
RF-8601 Styrene Acrylic for Economical Interior Exterior Paint
Benefits and Application
RF-8601 is an acrylic ester - styrene copolymer emulsion , it is adapted to make the various / exterior latex paint base material . Also be used as a binder and a variety of other uses of the substrate.
RF-8601 Emulsion according to general paint and adhesive requirements and design of a film with good adhesion / water resistance / alkali and weather resistance, flexibility and not sticky . Can be used from the primer / various interior and exterior wall pigment volume consequence % range of the coating, the emulsion has good mechanical stability, storage stability, chemical stability, energy and various general-purpose pigments /fillers / additives have good ompatibility, so that the coating material in constructability/storability/color development aspects have good stability .
RF-8601 can be used to produce a variety of interior and exterior coatings.
Typical Properties
|
Property
|
Typical Values
|
|
Appearance
|
Milky white slightly transparent liquid
|
|
Solids Content
|
50 ± 1%
|
|
pH (20°C)
|
7.0 -8.5
|
|
Viscosity (Brookfield LV,spindle 3@30rpm, 25°C)
|
1,000 - 5,000 cps
|
|
Particle size
|
0. 15 µm
|
|
Ca ion stability (5%CaCl, 1:5)
|
Pass
|
|
Mechanical stability (2800rpm , 1hr)
|
Pass
|
|
The lowest film forming temperature, °C
|
20 |
|
Low temperature sensitivity
|
<0°c
|
|
Ionicity
|
Anion
|













